MIDDLE EAST Q-5417 |
||
PRODUCT DATA SHEET |
||
Industrial Quick Drying Enamel |
||
` Description |
Middle East Industrial Quick Drying Enamel Q-5417 is based on suitably modified styrenated alkyd containing titanium dioxide and other fast pigments to provide a tough, durable and hard wearing high gloss finish. With good flow, hiding power and film build-up. Especially for industries where quick drying is required. |
|
Properties & Uses |
Extra gloss finishing of wood, metal and cemented substrates. Suitable for industrial requirements, normally applied over conventional primers and undercoats. |
|
Particulars |
Colour |
Standard color range available |
Solid Content |
54 ± 2% by volume |
|
Recommended Film Thickness |
25 microns |
|
Theoretical Coverage |
Approximate 12 – 16 m2 / liter @ 30 microns DFT on smooth non absorbent surface |
|
Practical Coverage |
Reduce up by 20% |
|
Finish |
Gloss, Semi-gloss, Matt |
|
Application Details |
Tools / Method |
By brush, roller and conventional spray |
Thinner / Cleaner |
Middle East Thinner # 8005 |
|
Drying Time |
Touch dry 30 minutes / Through dry 3 hours |
|
Recoating Time |
After minimum 3 hours |
|
Surface Preparation |
Surface should be clean, dry and free from loose grits oil, grease, dust, etc. Apply to suitable primed and undercoated surfaces. |
|
Storage & Handling |
Storage |
Store in safe, cool, dry and well ventilated place. Keep out of reach of children. |
Safety |
Flammable – Flash point above 40 ºC |
|
Shelf life |
12 months in unopened container |
|
|
|
|
Disclaimer |
The information stated herein is to the best of our knowledge true, accurate and is given in good faith but without warranty. The user will be deemed to have satisfied himself independently as to the suitability of our products for his own particular purpose. The document will be updated at least two years. It is the user’s responsibility to ensure they have the current copy.
Issued Date : January 2010
|