MIDDLE EAST Y-1111 |
||
PRODUCT DATA SHEET |
||
Acrylic Putty Y-1111 |
||
Description |
Middle East Acrylic Putty Y-1111 a high quality, ready mix putty based on superior, copolymer, pigments and stabilizing agents to impact toughness and maximum fillings. |
|
Properties & Uses |
Suitable to fill pores and imperfections of wooden, concrete and plastered surfaces. This can be over coated with solvent base coatings. |
|
Particulars |
Colour |
White |
Solid Content |
60 ± 2% by volume |
|
Recommended Film Thickness |
Dry – 140 microns / Wet – 250 microns |
|
Theoretical Spreading Rate |
3.5 m2 / kg at 100-150 microns DFT |
|
Practical Spreading Rate |
Depend on the nature of substrate |
|
Finish |
Matt |
|
Application Details |
Tools / Method |
By putty knife or trowel |
Cleaner |
Clean water for cleaning tools and equipments |
|
Drying Time |
Touch dry 1 hour /Through dry 12 hours |
|
Recoating Time |
After 4 hours |
|
Surface Preparation |
Surface should be clean, dry and free from loose grits oil, grease, dust, etc. |
|
Storage & Handling |
Storage |
Store in cool and dry place, keep out of reach of children. |
Safety |
Non-flammable |
|
Shelf life |
12 months in unopened container |
|
|
|
|
Disclaimer |
The information stated herein is to the best of our knowledge true, accurate and is given in good faith but without warranty. The user will be deemed to have satisfied himself independently as to the suitability of our products for his own particular purpose. The document will be updated at least two years. It is the user’s responsibility to ensure they have the current copy.
Issued Date : January 2010
|